
Wet mopping, single work step (direct method) Dosing system on the cleaning cart
To remove easily removable dirt from floor coverings in a single work step using the pre-wetted cleaning cloth and wet mopping unit.Also suitable for water-sensitive floor coverings. Please note: Use a fresh mop for each room to ensure maximum hygiene.
Preparatory work
Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.
Fill the dosing system with the cleaning product in accordance with the dosing instructions.
Specify the amount of wetting solution per mop on the dosing device.
Put up the warning sign.
Ensure the dry mop is correctly attached to the wet mopping unit and place it in the dosing tray.
Activate the lever on the dosing device (press once) to moisten the mop with cleaning solution.
Remove any loose dirt (dust-binding mopping or dry vacuum cleaning) while the mop is absorbing the cleaning solution.
Main task
Remove the wet mopping unit with the pre-wet mop from the cleaning cart.
Start along the edges of the room and under furniture, then use the moistened mop and the wet mopping unit to mop the open space in slightly overlapping passes.
Change the mop when it gets dirty and put it with the dirty laundry; continue with step 1 of the main task until the entire area is clean.
Perform a visual check.
Final steps
Remove the warning sign once the floor covering is dry.
Empty and rinse out the dosing device.
Wash the used mops in the washing machine.
Clean the cleaning materials and replace as needed.
Comments
Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.